ACT, Inc. Orlando, Florida USA

Zodiac Marines
Johnson
Enforcer
Inside the cover the tool bag has the added items of a tee handle ball driver for the pump. Dielectric grease has been added to assist in corrosion protection. A timer has been added to aid in scheduling of maintenance. An additional rope has been stored for emergencies. Also added is a quick disconnect fresh water flush connector.

The added reliability through the use of all stainless steel clamps on fuel lines. Fuel line connectors and manifold are made of brass. The fuel pump body has been upgraded to aluminum. Also a clear in line fuel filter with spring clamps to assist in cleaning, has been added.

Throttle lever, connector and cable adjust screw are now made of brass or aluminum.

The packaging of the motor will include two 6 gallon fuel bladders by Zodiac. An additional rotor for the pump. The Operations, Service and Technical Manuals are on CD.
J30hp I-MARS/APRL
J30hp I-MARS/APRL
The new Johnson 30 hp I-MARS/APRL has many new features. From the outside you see a new color (non-reflective) Black. The rope start anchor has been designed to reduce the tear stress on the rope. As always an Emergency Shut Off switch at the tiller handle.

For securing the upper motor cover two additional clamps have been added. Post submersion de-watering instruction decal is prominently displayed for easy operation.

To assist in carrying the motor, a wrap around strap has been added to the lower motor cover. A pair of de-watering valves are used, one for the fuel system and one for the crankcase. They are located on the front of the motor for easy access with the opening & closing decal.

The handles and pins on the screw clamps have been made of stainless steel, for a long service life.
Johnson Enforcer
Fuel Bag
“Over 1,500,000 hours of SAFE and RELIABLE Operational Service”

The Craft Modification Kit (CMK) used on the Zodiac 470 family of soft and hard floor inflatable boats, provides enhanced performance, durability and utility. The CMK includes a Transom Cap with features and a pair of
Solid Aluminum Stringers.

The Transom Cap is made of Corrosion Resistant Stainless Steel (CRSS). Two layers of powder coating are applied to the Cap for the ultimate in toughness and resistance to harsh environmental extremes. The Cap utilizes a texture surface coating for positive grip when wet. The attachment of the Cap to the transom is complete with all Stainless Steel Hardware forming a rigid structure to the craft.

The CMK utilizes a pair of 7 foot Solid Aluminum Stringers. When the stringers are used with the hard floor, the boat hull takes on a rigid fixed shape. By reducing flex in the hull, the live payload capacity of the craft is extended. Solid Aluminum Stringers

The Cap is fitted with two large, easy to use, utility Eyebolts. They are particularly handy for use as tie down points, towing bridal hook up or as aft lifting points for the craft. Solid Aluminum Stringers

Positioning of the Johnson Enforcer motor on the Cap is simplified through the use of the Motor Position Guides. They provide positive placement of the Enforcer motor in the center of the Transom.
Zodiac Cap For Johnson Enforcer


The Motor Positioning Pins are secured to the Cap and assist in the rapid lock-in of the Johnson Enforcer
motor to the transom, through the use of matched pre-drilled alignment holes.		 Solid Aluminum Stringers
The Transom Cap installation may be completed by the user or at the contractor’s
facility prior to user receipt of the craft. Call for price and delivery time quotation.

Johnson Enforcer

Act, Inc. ~ Marine Propulsion Division
6831 Edgewater Commerce Parkway, Orlando, Florida 32810
Email: pumpjet2@bellsouth.net Toll Free: 877-786-7538 (USS-PUMPJET)